Due to fewer people nowadays having access to DVD players, I have recently started to convert my training material into online courses. I have updated two of my instructional videos/DVDs below and converted them into online courses. I also added an online course on correcting primary extraction for actions with extraction issues. I plan on adding more instructional courses as time goes on.
Online courses that are currently available (click order option 1 below):
"Evaluating Rifles for Accuracy Problems" - $59.95
"Epoxy Sleeving and Lapping Bolt Lugs for Accuracy" - $49.95
"Correcting Primary Extraction" - $39.95 (details for this course are on the Option 1 order page)
Bonus: Purchase any one of these courses and get one or both of these other courses at a discount (you can add other courses on checkout page)
New AR Accurizing online course is now available separately (click order option 2 below):
In addition to the above courses, I partnered with Gavin Gear (he runs the Ultimate Reloader YouTube channel) with converting my in-person AR Accurizing course into a complete Online AR Accurizing course option for just $249.95 , which has its separate button below. (More info on this course is on the AR Accurizing class on the Classes / Training page, or just click the Option 2: Online AR Accurizing course button below)
Note: When you purchase any online course, you will have lifetime access to that course, including any future updates.
These online courses need to be purchased separately from the DVDs and books below. I was unable to put my different training options all on the same shopping cart / checkout page, so I have 3 separate buttons/options that will take you to the appropriate page to purchase that options. Click on any of the buttons below to take you to the purchase page for that option:
Instructional DVDs and Book
DVD #1 : "Evaluating Rifles for Accuracy Problems"
In this intensive video, Gordy thoroughly explains rifle accuracy, the problems that cause poor accuracy, and shows how to completely evaluate/measure/gauge every aspect of a factory or custom rifle for accuracy problems.
He shows how to "slug" a bore to evaluate internal barrel problems, and has some terrific borescope footage that clearly shows crooked/off-center chambers, smeared lands caused by dull chamber reamers, chamber and throat "reamer chatter", throat erosion, and other accuracy robbing problems.
Gordy then goes into detail explaining some of the best procedures used to correct all the accuracy problems in the action, barrel, stock, bedding, trigger, and other components of a rifle, including the "Big Five" things that are absolutely essential to bring out the full accuracy potential in any rifle! $49.95 plus s/h
NOTE: This DVD has been updated and is also available as an online course (see online course info at top of page)
In this intensive video, Gordy thoroughly explains rifle accuracy, the problems that cause poor accuracy, and shows how to completely evaluate/measure/gauge every aspect of a factory or custom rifle for accuracy problems.
He shows how to "slug" a bore to evaluate internal barrel problems, and has some terrific borescope footage that clearly shows crooked/off-center chambers, smeared lands caused by dull chamber reamers, chamber and throat "reamer chatter", throat erosion, and other accuracy robbing problems.
Gordy then goes into detail explaining some of the best procedures used to correct all the accuracy problems in the action, barrel, stock, bedding, trigger, and other components of a rifle, including the "Big Five" things that are absolutely essential to bring out the full accuracy potential in any rifle! $49.95 plus s/h
NOTE: This DVD has been updated and is also available as an online course (see online course info at top of page)
DVD #2 "Epoxy 'Sleeving'and Lapping Bolt Lugs for Accuracy"
In this video, Gordy shares a previously secret and extremely effective method of reducing bolt play in a rifle action to increase accuracy, sometimes astonishingly so!
He also goes into great detail showing a very effective method of lapping bolt lugs without wearing them at an angle like so often happens when using conventional methods.
These two techniques go hand-in-hand to correct issues that have a major impact on the accuracy of a rifle! $39.95 plus s/h NOTE: This DVD has been updated and is also available as an online course (see online course info at top of page)
In this video, Gordy shares a previously secret and extremely effective method of reducing bolt play in a rifle action to increase accuracy, sometimes astonishingly so!
He also goes into great detail showing a very effective method of lapping bolt lugs without wearing them at an angle like so often happens when using conventional methods.
These two techniques go hand-in-hand to correct issues that have a major impact on the accuracy of a rifle! $39.95 plus s/h NOTE: This DVD has been updated and is also available as an online course (see online course info at top of page)
Book: "CHAMBERING RIFLES FOR ACCURACY"
This instructional book is co-authored by Fred Zeglin and Gordy Gritters. The methods detailed in this book can be used equally well by gunsmiths working in a professional shop, and by hobbyists working from a home shop to build extremely accurate hunting or benchrest rifles.
Fred wrote the first half of the book, which covers a wealth of information on the basics of what is needed to prepare for and chamber high accuracy hunting barrels. He includes a lot of detailed information on tools needed such as reamers, micrometer reamer stops, headspace gauges, etc.
Gordy wrote the second half of the book, which goes far beyond basic chambering. Gordy covers the details of setting up a lathe for accurately chambering barrels through the headstock, various dialing-in methods commonly used, how to deal with the curvature present in every rifle bore, and how to deal with reamer chatter (which is especially prevalent in the currently popular 5R-type barrels). He then finishes the book with a very detailed step-by-step section including lots of color photographs, on the entire dialing-in/threading/fitting/chambering/crowning process used to build a benchrest-quality rifle. This includes details of how to ream custom chamber necks, and how to throat the chamber for specific bullets or for a specific purpose.
$49.95 plus s/h
This instructional book is co-authored by Fred Zeglin and Gordy Gritters. The methods detailed in this book can be used equally well by gunsmiths working in a professional shop, and by hobbyists working from a home shop to build extremely accurate hunting or benchrest rifles.
Fred wrote the first half of the book, which covers a wealth of information on the basics of what is needed to prepare for and chamber high accuracy hunting barrels. He includes a lot of detailed information on tools needed such as reamers, micrometer reamer stops, headspace gauges, etc.
Gordy wrote the second half of the book, which goes far beyond basic chambering. Gordy covers the details of setting up a lathe for accurately chambering barrels through the headstock, various dialing-in methods commonly used, how to deal with the curvature present in every rifle bore, and how to deal with reamer chatter (which is especially prevalent in the currently popular 5R-type barrels). He then finishes the book with a very detailed step-by-step section including lots of color photographs, on the entire dialing-in/threading/fitting/chambering/crowning process used to build a benchrest-quality rifle. This includes details of how to ream custom chamber necks, and how to throat the chamber for specific bullets or for a specific purpose.
$49.95 plus s/h
DVD: "Chambering a Championship Match Barrel"
A professional DVD produced by Grizzly Industrial featuring Gordy Gritters and the Grizzly Gunsmith's Lathe that Gordy helped design.
In this DVD, Gordy explains in great detail and shows the exact techniques he uses to build rifles that over the past 37 years have set numerous state, national, and world records, and that have won many state, regional, and national championships.
This DVD is currently available through my website here or from Grizzly Industrial - www.grizzly.com
$49.95 plus s/h Temporarily out of stock
A professional DVD produced by Grizzly Industrial featuring Gordy Gritters and the Grizzly Gunsmith's Lathe that Gordy helped design.
In this DVD, Gordy explains in great detail and shows the exact techniques he uses to build rifles that over the past 37 years have set numerous state, national, and world records, and that have won many state, regional, and national championships.
This DVD is currently available through my website here or from Grizzly Industrial - www.grizzly.com
$49.95 plus s/h Temporarily out of stock
Note: Online courses need to be purchased separately from DVDs, books, and in-person classes. I was unable to put my different training options all on the same shopping cart / checkout page, so I have 3 separate buttons/options that will take you to the appropriate page to purchase that option. Click on any of the buttons below to take you to the purchase page for that option: